Allied Telesis AT-S60 - Manual (Page 661)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 661
Clearing the Event Log
To clear all events from the log, perform the following procedure:
1. From the Home Page, click Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 192 on page 584.
2. From the System page, select the Event Log tab.
The Event Log tab is shown in Figure 223 on page 656.
3. In Log Settings, click Clear Log.
4. Click Apply.
The log, if enabled, learns new events immediately.