Allied Telesis AT-S60 - Manual (Page 119)

AT-S60 Management Software User’s Guide
Section I: Basic Features 119
3. Select the desired option. Each option is described below:
1 - Display All MAC Addresses
This option displays the Display All MAC Addresses menu. This
menu lists all the switch’s dynamic and static address, including
multicast addresses. An example of the menu is shown in Figure
33.
Figure 33 Show All MAC Addresses Menu
The columns in the menu are defined in Table 3.
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
High School Switch 142
User: Manager 00:14:33 01-Jan-2004
Display All MAC Addresses
Total Number of MAC Addresses: 212
VlanID MAC Port Type
---------------------------------------------------------------
1
00:a0:d2:18:1a:c8 1.1 Dynamic
1 00:a0:c4:16:3b:80 1.2 Dynamic
1 00:a0:12:c2:10:c6 1.3 Dynamic
1 00:a0:c2:09:10:d8 1.4 Dynamic
1 00:a0:33:43:a1:87 1.5 Dynamic
1 00:a0:12:a7:14:68 1.6 Dynamic
1 00:a0:d2:22:15:10 1.7 Dynamic
1 00:a0:d4:18:a6:89 1.8 Dynamic
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?
Table 3 Columns in the Display All MAC Addresses Menu
Column Definition
VlanID The VID of the port where the MAC address was
learned.
MAC
Address The dynamic, static, or multicast MAC address.
Port The port where the address was learned (dynamic) or
assigned (static).
TYPE The type of MAC address: dynamic, static, or
multicast.