Allied Telesis AT-S60 - Manual (Page 147)

AT-S60 Management Software User’s Guide
Section I: Basic Features 147
The following prompt appears:
Enter Source Port(s) [port-list]:
6. Enter the source mirror port (s) or port list and press Return.
Note
You cannot assign a range of ports as source mirror ports.
The display at the top of the Port Mirroring menu is updated.
7. To delete a source port mirror, enter 2.
The following prompt appears:
Enter Destination Port:
8. Enter the destination port from the list at the top of the screen and
press Return.
The following prompt appears:
Enter Source Port(s) [port-list]:
9. Enter source mirror port(s) or port list and press Return.
The source and destination mirror ports are removed from the
display at the top of the menu.
10. To set, or overwrite, a source mirror port, enter 3.
The following prompt appears:
Enter Destination Port:
11. Enter the destination port from the list at the top of the screen and
press Return.
The following prompt appears:
Enter Source Port(s) [port-list]:
12. Enter the new source mirror port(s) or port list and press Return.
13. To clear, or remove, all source mirror ports from a port mirror, type 4.
The following prompt appears:
Enter Destination Port:
14. Enter the destination mirror port from the list at the top of the screen
and press Return.
All source mirror ports are removed from the Modify Mirror Menu.
15. After making changes, type R until you return to the Main Menu.Then
type S to select Save Configuration Changes.
The port mirror is updated with your changes.