Allied Telesis AT-S60 - Manual (Page 55)

AT-S60 Management Software User’s Guide
Section I: Basic Features 55
Displaying and Clearing System Information
This section describes how to display and clear the system information
for an AT-8400 switch. See the following procedures:
❑ Displaying System Information on page 55
❑ Clearing System Statistics on page 56
Displaying
System
Information
To display the system information, perform the following procedure.
1. From the Main Menu, type 5 to select System Menu.
The System Menu is shown in Figure 5 on page 51.
2. From the System Menu, type 2 to select Display System.
The Display System Menu is shown in Figure 9.
Figure 9 Display System Menu
3. From the Display System Menu, type 3 to select Display System
Statistics.
Allied Telesyn AT-8400 Series - AT-S60 V2.1.0
Engineering Switch 14
User: Manager 00:14:33 15-Jan-2004
Display System
1 - Display System Software Information
2 - Display System Hardware Information
3 - Display System Statistics
4 - Clear System Statistics
R - Return to Previous Menu
Enter your selection?