Allied Telesis AT-S60 - Manual (Page 197)

AT-S60 Management Software User’s Guide
Section II: Advanced Features 197
4. In the HyperTerminal main window, select the Transfer menu. Then
select Receive File from the pull-down menu, as shown in Figure 60.
Figure 60 Transfer Menu
The Receive File window in Figure 61 is shown.
Figure 61 Receive File Window
5. In the Place received file in the following folder field, type the path to
the destination folder, or click the Browse button to locate the
destination folder.
6. Click on the Protocol field and select as the transfer protocol either
Xmodem or, for a faster download, 1K XModem.
7. Click Receive.
The Receive filename window is displayed, as shown in Figure 62.
Figure 62 Receive Filename Window