Allied Telesis AT-S60 - Manual (Page 673)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 673
.
Figure 231 Expanded STP Spanning Tree Tab
3. In the Configure STP Parameters section, adjust the bridge STP
settings as needed. The parameters are described below.
Bridge Priority
The priority number for the bridge. This number is used in
determining the root bridge for STP. The bridge with the lowest
priority number is selected as the root bridge. If two or more
bridges have the same priority value, the bridge with the
numerically lowest MAC address becomes the root bridge. When
a root bridge goes off-line, the bridge with the next priority
number automatically takes over as the root bridge. This