Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 955)

Brocade 6910 Ethernet Access Switch Configuration Guide 899
53-1002651-02
42
Access Control Lists
3. Use the Add Mirror page to specify the ACL and the destination port to which matching traffic
will be mirrored.
Parameters
These parameters are displayed:
• Port – Port identifier.
• ACL – ACL used for ingress packets.
Interface
To bind an ACL to a port:
1. Click Security, ACL.
2. Select Configure Interface from the Step list.
3. Select Add Mirror from the Action list.
4. Select a port.
5. Select the name of an ACL from the ACL list.
6. Click Apply.
FIGURE 215 Configuring ACL Mirroring
To show the ACLs to be mirrored:
1. Select Configure Interface from the Step list.
2. Select Show Mirror from the Action list.
3. Select a port.
FIGURE 216 Showing the VLANs to Mirror