Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 118)

62 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
5
System Status
• Interface settings and VLAN configuration settings for each interface
• IP address for management VLAN
• Any configured settings for the console port and Telnet
Example
Refer to the example for the running configuration file.
Related Commands
“show running-config” on page 60
show system
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
For a description of the items shown by this command, refer to
“Displaying System Information” on
page 675, and “Displaying Hardware/Software Versions” on page 676.
Example
Console#show system
System Description : BR6910
System OID String : 1.3.6.1.4.1.1991.1.16.1
System Information
System Up Time : 0 days, 0 hours, 24 minutes, and 14.4 seconds
System Name :
System Location :
System Contact :
MAC Address (Unit 1) : 70-72-CF-32-DD-FD
Web Server : Enabled
Web Server Port : 80
Web Secure Server : Enabled
Web Secure Server Port : 443
Telnet Server : Enabled
Telnet Server Port : 23
Jumbo Frame : Disabled
System Temperature:
Unit 1
Temperature 1: 29 degrees Temperature 2: 27 degrees Temperature 3: 24 degrees
Main Power Status : Up
Redundant Power Status : Up
Console#