Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 227)

Brocade 6910 Ethernet Access Switch Configuration Guide 171
53-1002651-02
9
Secure Shell
Related Commands
“ip ssh crypto host-key generate” on page 169
show ip ssh
This command displays the connection settings used when authenticating client access to the SSH
server.
Command Mode
Privileged Exec
Example
Console#show ip ssh
SSH Enabled - Version 2.0
Negotiation Timeout : 120 seconds; Authentication Retries : 3
Server Key Size : 768 bits
Console#
show public-key
This command shows the public key for the specified user or for the host.
Syntax
show public-key [user [username]| host]
username – Name of an SSH user. (Range: 1-8 characters)
Default Setting
Shows all public keys.
Command Mode
Privileged Exec
Command Usage
• If no parameters are entered, all keys are displayed. If the user keyword is entered, but no user
name is specified, then the public keys for all users are displayed.
• When an RSA key is displayed, the first field indicates the size of the host key (e.g., 1024), the
second field is the encoded public exponent (e.g., 35), and the last string is the encoded
modulus. When a DSA key is displayed, the first field indicates that the encryption method
used by SSH is based on the Digital Signature Standard (DSS), and the last string is the
encoded modulus.
Example
Console#show public-key host
Host:
RSA:
1024 65537 13236940658254764031382795526536375927835525327972629521130241
071942106165575942459093923609695405036277525755625100386613098939383452310332802
149888661921595568598879891919505883940181387440468908779160305837768185490002831
341625008348718449522087429212255691665655296328163516964040831554766066415165711
6381