Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 219)

Brocade 6910 Ethernet Access Switch Configuration Guide 163
53-1002651-02
9
Telnet Server
ip telnet port
This command specifies the TCP port number used by the Telnet interface. Use the no form to use
the default port.
Syntax
ip telnet port port-number
no telnet port
port-number - The TCP port number to be used by the browser interface. (Range: 1-65535)
Default Setting
23
Command Mode
Global Configuration
Example
Console(config)#ip telnet port 123
Console(config)#
ip telnet server
This command allows this device to be monitored or configured from Telnet. Use the no form to
disable this function.
Syntax
[no] ip telnet server
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#ip telnet server
Console(config)#
show ip telnet
This command displays the configuration settings for the Telnet server.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show ip telnet
IP Telnet Configuration:
Telnet Status: Enabled
Telnet Service Port: 23