Web-auth system-auth-control, Web-auth, Web-auth system-auth-control web-auth – Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual

Page 264

208

Brocade 6910 Ethernet Access Switch Configuration Guide

53-1002651-02

Web Authentication

Example

Console(config)#web-auth session-timeout 1800

Console(config)#

web-auth system-auth-control

This command globally enables web authentication for the switch. Use the no form to restore the
default.

Syntax

[no] web-auth system-auth-control

Default Setting
Disabled

Command Mode
Global Configuration

Command Usage
Both web-auth system-auth-control for the switch and

for an interface must be enabled

for the web authentication feature to be active.

Example

Console(config)#web-auth system-auth-control

Console(config)#

web-auth

This command enables web authentication for an interface. Use the no form to restore the default.

Syntax

[no] web-auth

Default Setting
Disabled

Command Mode
Interface Configuration

Command Usage
Both

for the switch and web-auth for a port must be enabled for the

web authentication feature to be active.

Example

Console(config-if)#web-auth

Console(config-if)#