Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 538)

482 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
23
MVR for IPv4
Default Setting
Displays configuration settings for all domains and all forwarding entries.
Command Mode
Privileged Exec
Example
The following shows information about the number of multicast forwarding entries currently active
in domain 1:
Console#show mvr domain 1 members
MVR Domain : 1
MVR Forwarding Entry Count :1
Console#
The following example shows detailed information about a specific multicast address:
Console#show mvr domain 1 members 234.5.6.7
MVR Domain : 1
MVR Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts join the group on this port).
P - Port counts (number of ports join the group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (d:h:m:s).
Group Address VLAN Port Up time Expire Count
--------------- ---- ----------- ----------- ----------- --------
234.5.6.8 1 00:00:13:29 2(P)
1 Eth 1/ 2(S)
2 Eth 1/ 3(R) 00:00:13:24 00:00:01:18 1(H)
Console#
show mvr profile
This command shows all configured MVR profiles.
Command Mode
Privileged Exec
TABLE 113 show mvr members - display description
Field Description
Group Address Multicast group address.
VLAN VLAN to which this address is forwarded.
Port Port to which this address is forwarded.
Uptime Time that this multicast group has been known.
Expire The time until this entry expires.
Count The number of times this address has been learned by IGMP snooping.