beautypg.com

Clear mac-address-table dynamic, Show mac-address-table – Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual

Page 381

background image

Brocade 6910 Ethernet Access Switch Configuration Guide

325

53-1002651-02

17

Address Table Commands

clear mac-address-table dynamic

This command removes any learned entries from the forwarding database.

Default Setting
None

Command Mode
Privileged Exec

Example

Console#clear mac-address-table dynamic

Console#

show mac-address-table

This command shows classes of entries in the bridge-forwarding database.

Syntax

show mac-address-table [address mac-address [mask]] [interface interface] [vlan vlan-id]

[sort {address | vlan | interface}]

mac-address - MAC address.

mask - Bits to match in the address.

interface

ethernet unit/port

unit - Unit identifier. (Range: 1)

port - Port number. (Range: 1-12)

port-channel channel-id (Range: 1-12)

vlan-id - VLAN ID (Range: 1-4093)

sort - Sort by address, vlan or interface.

Default Setting
None

Command Mode
Privileged Exec

Command Usage

The MAC Address Table contains the MAC addresses associated with each interface. Note that
the Type field may include the following types:

Learn - Dynamic address entries

Config - Static entry