Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 539)

Brocade 6910 Ethernet Access Switch Configuration Guide 483
53-1002651-02
23
MVR for IPv4
Example
The following shows all configured MVR profiles:
Console#show mvr profile
MVR Profile Name Start IP Addr. End IP Addr.
-------------------- --------------- ---------------
rd 228.1.23.1 228.1.23.10
testing 228.2.23.1 228.2.23.10
Console#
show mvr statistics
This command shows MVR protocol-related statistics for the specified interface.
Syntax
show mvr statistics {input | output} [interface interface]
show mvr domain domain-id statistics
{input [interface interface] | output [interface interface] | query}
domain-id - An independent multicast domain. (Range: 1-5)
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
vlan vlan-id - VLAN ID (Range: 1-4093)
query - Displays MVR query-related statistics.
Default Setting
Displays statistics for all domains.
Command Mode
Privileged Exec
Example
The following shows MVR protocol-related statistics received:
Console#show mvr domain 1 statistics input
MVR Domain : 1
Input Statistics:
Interface Report Leave G Query G(-S)-S Query Drop Join Succ Group
--------- -------- -------- -------- ------------- -------- --------- ------
Eth 1/ 1 23 11 4 10 5 20 9
Eth 1/ 2 12 15 8 3 5 19 4
VLAN 1 2 0 0 2 2 20 9
Console#