Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 350)

294 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
13
Link Aggregation Commands
Console#show lacp 1 internal
Port Channel : 1
-------------------------------------------------------------------------
Oper Key : 3
Admin Key : 0
Timeout : long
Eth 1/ 1
-------------------------------------------------------------------------
LACPDUs Internal : 30 seconds
LACP System Priority : 32768
LACP Port Priority : 32768
Admin Key : 3
Oper Key : 3
Admin State : defaulted, aggregation, long timeout, LACP-activity
Oper State : distributing, collecting, synchronization,
aggregation, long timeout, LACP-activity
.
.
.
TABLE 67 show lacp internal - display description
Field Description
Oper Key Current operational value of the key for the aggregation port.
Admin Key Current administrative value of the key for the aggregation port.
Timeout Time to wait for the next LACPDU before deleting partner port information.
LACPDUs Internal Number of seconds before invalidating received LACPDU information.
LACP System Priority LACP system priority assigned to this port channel.
LACP Port Priority LACP port priority assigned to this interface within the channel group.
Admin State,
Oper State Administrative or operational values of the actor’s state parameters:
•
Expired – The actor’s receive machine is in the expired state;
•
Defaulted – The actor’s receive machine is using defaulted operational partner
information, administratively configured for the partner.
•
Distributing – If false, distribution of outgoing frames on this link is disabled; i.e.,
distribution is currently disabled and is not expected to be enabled in the absence of
administrative changes or changes in received protocol information.
•
Collecting – Collection of incoming frames on this link is enabled; i.e., collection is
currently enabled and is not expected to be disabled in the absence of administrative
changes or changes in received protocol information.
•
Synchronization – The System considers this link to be IN_SYNC; i.e., it has been
allocated to the correct Link Aggregation Group, the group has been associated with a
compatible Aggregator, and the identity of the Link Aggregation Group is consistent
with the System ID and operational Key information transmitted.
•
Aggregation – The system considers this link to be aggregatable; i.e., a potential
candidate for aggregation.
•
Long timeout – Periodic transmission of LACPDUs uses a slow transmission rate.
•
LACP-Activity – Activity control value with regard to this link. (0: Passive; 1: Active)