Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual
Page 328

272
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
12
Interface Commands
output - Egress traffic.
Default Setting
Shows historical statistics for all interfaces, intervals, ingress traffic, and egress traffic.
Command Mode
Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a description of the items
displayed by this command, see
“Showing Port or Trunk Statistics”
Example
This example shows the statistics recorded for all named entries in the sampling table.
Console#show interfaces history ethernet 1/1
Interface : Eth 1/ 1
Name : 1min
Interval : 1 minute(s)
Buckets Requested : 15
Buckets Granted : 15
Status : Active
Current Entries
Start Time Octets Input Unicast Multicast Broadcast
------------ --------------- ------------- ------------- -------------
00d 02:50:52 15059355 80275 43750 2304
Discards Errors Unknown Proto
------------- ------------- -------------
0 0 0
Octets Output Unicast Multicast Broadcast
--------------- ------------- ------------- -------------
84493398 106787 47232 1158
Discards Errors
------------- -------------
0 0
Interface : Eth 1/ 1
Name : 15min
Interval : 15 minute(s)
Buckets Requested : 96
Buckets Granted : 11
Status : Active
Current Entries
Start Time Octets Input Unicast Multicast Broadcast
------------ --------------- ------------- ------------- -------------
00d 02:45:07 116003318 616894 336491 17899
Discards Errors Unknown Proto
------------- ------------- -------------
0 0 0