Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 164)

108 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
6
SNMP Commands
snmp-server contact
This command sets the system contact string. Use the no form to remove the system contact
information.
Syntax
snmp-server contact string
no snmp-server contact
string - String that describes the system contact information. (Maximum length:
255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#snmp-server contact Paul
Console(config)#
Related Commands
“snmp-server location” on page 108
snmp-server location
This command sets the system location string. Use the no form to remove the location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#snmp-server location WC-19
Console(config)#
Related Commands
“snmp-server contact” on page 108