Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 1028)

972 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
43
Simple Network Management Protocol
• Number of requested variables – The total number of MIB objects which have been retrieved
successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and
Get-Next PDUs.
• Number of altered variables – The total number of MIB objects which have been altered
successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request
PDUs.
• Get-request PDUs – The total number of SNMP Get-Request PDUs which have been accepted
and processed, or generated, by the SNMP protocol entity.
• Get-next PDUs – The total number of SNMP Get-Next PDUs which have been accepted and
processed, or generated, by the SNMP protocol entity.
• Set-request PDUs – The total number of SNMP Set-Request PDUs which have been accepted
and processed, or generated, by the SNMP protocol entity.
• SNMP packets output – The total number of SNMP Messages which were passed from the
SNMP protocol entity to the transport service.
• Too big errors – The total number of SNMP PDUs which were generated by the SNMP protocol
entity and for which the value of the error-status field is “tooBig.”
• No such name errors – The total number of SNMP PDUs which were delivered to, or generated
by, the SNMP protocol entity and for which the value of the error-status field is “noSuchName.”
• Bad values errors – The total number of SNMP PDUs which were delivered to, or generated by,
the SNMP protocol entity and for which the value of the error-status field is “badValue.”
• General errors – The total number of SNMP PDUs which were delivered to, or generated by, the
SNMP protocol entity and for which the value of the error-status field is “genErr.”
• Response PDUs – The total number of SNMP Get-Response PDUs which have been accepted
and processed by, or generated by, the SNMP protocol entity.
• Trap PDUs – The total number of SNMP Trap PDUs which have been accepted and processed
by, or generated by, the SNMP protocol entity.
Interface
To show SNMP statistics:
1. Click Administration, SNMP.
2. Select Show Statistics from the Step list.