Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 542)

486 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
23
MVR for IPv6
mvr6 associated-profile
This command binds the MVR group addresses specified in a profile to an MVR domain. Use the no
form of this command to remove the binding.
Syntax
[no] mvr6 domain domain-id associated-profile profile-name
domain-id - An independent multicast domain. (Range: 1-5)
profile-name - The name of a profile containing one or more MVR group addresses.
(Range: 1-21 characters)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
MRV6 domains can be associated with more than one MVR6 profile. But since MVR6 domains
cannot share the group range, an MRV6 profile can only be associated with one MVR6 domain.
Example
The following an MVR group address profile to domain 1:
Console(config)#mvr6 domain 1 associated-profile rd
Console(config)#
mvr6 domain
This command enables Multicast VLAN Registration (MVR) for a specific domain. Use the no form
of this command to disable MVR for a domain.
Syntax
[no] mvr6 domain domain-id
domain-id - An independent multicast domain. (Range: 1-5)
show mvr6
associated-profile Shows the profiles bound the specified domain PE
show mvr6 interface Shows MVR settings for interfaces attached to the MVR VLAN PE
show mvr6 members Shows information about the current number of entries in the
forwarding database, or detailed information about a specific
multicast address PE
show mvr6 profile Shows all configured MVR profiles PE
show mvr6 statistics Shows MVR protocol statistics for the specified interface PE
TABLE 117 Multicast VLAN Registration for IPv6 Commands (Continued)
Command Function Mode