Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 330)

274 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
12
Interface Commands
Discards Errors
------------- -------------
0 0
Previous Entries
Start Time Octets Input Unicast Multicast Broadcast
------------ --------------- ------------- ------------- -------------
00d 00:05:37 1400912 9381 1895 50
00d 00:06:37 1566090 10660 2195 50
00d 00:07:37 1754781 11786 2674 59
Start Time Octets Input Discards Errors Unknown Proto
------------ --------------- ------------- ------------- -------------
00d 00:05:37 1400912 0 0 0
00d 00:06:37 1566090 0 0 0
00d 00:07:37 1754781 0 0 0
Start Time Octets Output Unicast Multicast Broadcast
------------ --------------- ------------- ------------- -------------
00d 00:05:37 6827866 10563 2042 30
00d 00:06:37 7572668 12040 2362 30
00d 00:07:37 8548505 13380 2879 30
Start Time Octets Output Discards Errors
------------ --------------- ------------- -------------
00d 00:05:37 6827866 0 0
00d 00:06:37 7572668 0 0
00d 00:07:37 8548505 0 0
Console#
show interfaces status
This command displays the status for an interface.
Syntax
show interfaces status [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
vlan vlan-id (Range: 1-4093)
Default Setting
Shows the status for all interfaces.
Command Mode
Normal Exec, Privileged Exec