Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 224)

168 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
9
Secure Shell
Command Mode
Global Configuration
Command Usage
The server key is a private key that is never shared outside the switch.
The host key is shared with the SSH client, and is fixed at 1024 bits.
Example
Console(config)#ip ssh server-key size 512
Console(config)#
ip ssh timeout
This command configures the timeout for the SSH server. Use the no form to restore the default
setting.
Syntax
ip ssh timeout seconds
no ip ssh timeout
seconds – The timeout for client response during SSH negotiation. (Range: 1-120)
Default Setting
10 seconds
Command Mode
Global Configuration
Command Usage
The timeout specifies the interval the switch will wait for a response from the client during the SSH
negotiation phase. Once an SSH session has been established, the timeout for user input is
controlled by the
exec-timeout command for vty sessions.
Example
Console(config)#ip ssh timeout 60
Console(config)#
Related Commands
“exec-timeout” on page 77
“show ip ssh” on page 171