Accounting exec, Authorization exec, Accounting exec authorization exec – Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual
Page 213
Brocade 6910 Ethernet Access Switch Configuration Guide
157
53-1002651-02
9
AAA
accounting exec
This command applies an accounting method to local console, Telnet or SSH connections. Use the
no form to disable accounting on the line.
Syntax
accounting exec {default | list-name}
no accounting exec
default - Specifies the default method list created with the
command.
list-name - Specifies a method list created with the
command.
Default Setting
None
Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#accounting exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#accounting exec default
Console(config-line)#
authorization exec
This command applies an authorization method to local console, Telnet or SSH connections. Use
the no form to disable authorization on the line.
Syntax
authorization exec {default | list-name}
no authorization exec
default - Specifies the default method list created with the
command.
list-name - Specifies a method list created with the
command.
Default Setting
None
Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#authorization exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#authorization exec default
Console(config-line)#