Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 127)

Brocade 6910 Ethernet Access Switch Configuration Guide 71
53-1002651-02
5
File Management
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• If you enter the command dir without any parameters, the system displays all files.
File information is shown below:
Example
The following example shows how to display all file information:
Console#dir
File Name Type Startup Modify Time Size(bytes)
-------------------------- -------------- ------- ------------------- ----------
Unit 1:
es020205.bix OpCode N 2011-09-02 11:33:31 12760220
es020206.bix OpCode Y 2011-09-02 12:30:58 12764320
Factory_Default_Config.cfg Config N 2011-05-31 03:27:56 455
startup1.cfg Config Y 2011-08-16 11:19:44 1135
-----------------------------------------------------------------------------
Free space for compressed user config files: 1318912
Console#
whichboot
This command displays which files were booted when the system powered up.
Syntax
whichboot
Default Setting
None
Command Mode
Privileged Exec
TABLE 16 File Directory Information
Column Heading Description
File Name The name of the file.
File Type File types: Boot-Rom, Operation Code, and Config file.
Startup Shows if this file is used when the system is started.
Create Time The date and time the file was created.
Size The length of the file in bytes.