beautypg.com

Multicast vlan registration for ipv6, Figure 402 dis – Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual

Page 1183

background image

Brocade 6910 Ethernet Access Switch Configuration Guide

1127

53-1002651-02

47

Multicast VLAN Registration for IPv6

FIGURE 402

Displaying MVR Statistics – Port

Multicast VLAN Registration for IPv6

MVR6 functions in a manner similar to that described for MRV (see

“Multicast VLAN Registration

for IPv6”

on page 1127).

Command Usage

General Configuration Guidelines for MVR6:

1. Enable MVR6 for a domain on the switch, and select the MVR VLAN (see

“Configuring

MVR6 Domain Settings”

on page 1129).

2. Create an MVR6 profile by specifying the multicast groups that will stream traffic to

attached hosts, and assign the profile to an MVR6 domain (see

“Configuring MVR6 Group

Address Profiles”

on page 1130).

3. Set the interfaces that will join the MVR as source ports or receiver ports (see

“Configuring

MVR6 Interface Status”

on page 1133).

4. For multicast streams that will run for a long term and be associated with a stable set of

hosts, you can statically bind the multicast group to the participating interfaces (see

“Assigning Static MVR6 Multicast Groups to Interfaces”

on page 1134).