Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 101)

Brocade 6910 Ethernet Access Switch Configuration Guide 45
53-1002651-02
4
General Commands
Example
This example shows how to return to the Privileged Exec mode from the Interface Configuration
mode:
Console(config-if)#end
Console#
exit
This command returns to the previous configuration mode or exits the configuration program.
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Privileged Exec mode from the Global Configuration mode,
and then quit the CLI session:
Console(config)#exit
Console#exit
Press ENTER to start session
User Access Verification
Username: