Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 175)

Brocade 6910 Ethernet Access Switch Configuration Guide 119
53-1002651-02
6
SNMP Commands
show snmp user
This command shows information on SNMP users.
Command Mode
Privileged Exec
Example
Console#show snmp user
Engine ID : 800000ca030030f1df9ca00000
User Name : steve
Group Name : tps
Security Model : v3
Security Level : Authentication and privacy
Authentication Protocol : MD5
Privacy Protocol : AES192
Storage Type : Nonvolatile
Row Status : Active
SNMP remote user
Engine ID : 80000000030004e2b316c54321
User Name : mark
Group Name : tps
Security Model : v3
Security Level : Authentication and privacy
Authentication Protocol : md5
Privacy Protocol : des56
Storage Type : Nonvolatile
Row Status : Active
Console#
TABLE 29 show snmp user - display description
Field Description
EngineId String identifying the engine ID.
User Name Name of user connecting to the SNMP agent.
Group Name Name of an SNMP group.
Security Model The SNMP version.
Security Level The following security levels can be used:
•
No Authentication, no privacy – There is no authentication or encryption used
in SNMP communications. (This is the default security level.)
•
Authentication, no privacy – SNMP communications use authentication, but
the data is not encrypted.
•
Authentication, privacy – SNMP communications use both authentication and
encryption.
Authentication Protocol The authentication protocol used with SNMPv3.
Privacy Protocol The privacy protocol used with SNMPv3.
Storage Type The storage type for this entry.
Row Status The row status of this entry.
SNMP remote user A user associated with an SNMP engine on a remote device.