Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual
Page 719

Brocade 6910 Ethernet Access Switch Configuration Guide
663
53-1002651-02
32
Navigating the Web Browser Interface
Auto Traffic Control
Sets thresholds for broadcast and multicast storms which can be used to
trigger configured rate limits or to shut down a port
Configure Global
Sets the time to apply the control response after traffic has exceeded the
upper threshold, and the time to release the control response after traffic
has fallen beneath the lower threshold
Configure Interface
Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a response of
rate limiting, or to send related SNMP trap messages
Priority
Default Priority
Sets the default priority for each port or trunk
Queue
Sets queue mode for the switch; sets the service weight for each queue
that will use a weighted or hybrid mode
Trust Mode
Selects DSCP or CoS priority processing
DSCP to DSCP
Configure
Maps DSCP values in incoming packets to per-hop behavior and drop
precedence values for internal priority processing
Show
Shows the DSCP to DSCP mapping list
CoS to DSCP
Configure
Maps CoS/CFI values in incoming packets to per-hop behavior and drop
precedence values for priority processing
Show
Shows the CoS to DSCP mapping list
PHB to Queue
Configure
Maps internal per-hop behavior values to hardware queues
Show
Shows the PHB to Queue mapping list
DiffServ
Configure Class
Add
Creates a class map for a type of traffic
Show
Shows configured class maps
Modify
Modifies the name of a class map
Add Rule
Configures the criteria used to classify ingress traffic
Show Rule
Shows the traffic classification rules for a class map
Configure Policy
Add
Creates a policy map to apply to multiple interfaces
Show
Shows configured policy maps
Modify
Modifies the name of a policy map
Add Rule
Sets the boundary parameters used for monitoring inbound traffic, and
the action to take for conforming and non-conforming traffic
Show Rule
Shows the rules used to enforce bandwidth policing for a policy map
Configure Interface
Applies a policy map to an ingress port
TABLE 153
Switch Main Menu (Continued)
Menu
Description
Page