Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 265)

Brocade 6910 Ethernet Access Switch Configuration Guide 209
53-1002651-02
10
Web Authentication
web-auth re-authenticate (Port)
This command ends all web authentication sessions connected to the port and forces the users to
re-authenticate.
Syntax
web-auth re-authenticate interface interface
interface - Specifies a port interface.
ethernet unit/port
unit - This is unit 1.
port - Port number. (Range: 1-12)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#web-auth re-authenticate interface ethernet 1/2
Console#
web-auth re-authenticate (IP)
This command ends the web authentication session associated with the designated IP address
and forces the user to re-authenticate.
Syntax
web-auth re-authenticate interface interface ip
interface - Specifies a port interface.
ethernet unit/port
unit - This is unit 1.
port - Port number. (Range: 1-12)
ip - IPv4 formatted IP address
Default Setting
None
Command Mode
Privileged Exec
Example
Console#web-auth re-authenticate interface ethernet 1/2 192.168.1.5
Console#