Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 109)

Brocade 6910 Ethernet Access Switch Configuration Guide 53
53-1002651-02
5
Banner Information
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure equipment-location command
interprets spaces as data input boundaries. The use of underscores ( _ ) or other unobtrusive
non-letter characters is suggested for situations where white space is necessary for clarity.
Example
Console(config)#banner configure equipment-location
710_Network_Path,_Indianapolis
Console(config)#
banner configure ip-lan
This command is used to configure the device IP address and subnet mask information displayed
in the banner. Use the no form to restore the default setting.
Syntax
banner configure ip-lan ip-mask
no banner configure ip-lan
ip-mask - The IP address and subnet mask of the device. (Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure ip-lan command interprets spaces as
data input boundaries. The use of underscores ( _ ) or other unobtrusive non-letter characters is
suggested for situations where white space is necessary for clarity.
Example
Console(config)#banner configure ip-lan 192.168.1.1/255.255.255.0
Console(config)#