Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 697)

Brocade 6910 Ethernet Access Switch Configuration Guide 641
53-1002651-02
31
Debug Commands
Example
Console#debug ipcfg
Dump IPv4 Rif
===============================================================================
IP Address prefix_len ifindex role
192.168.2.1 24 1001 1
192.168.3.1 24 1002 1
192.68.4.1 24 1003 1
Dump IPv6 Rif
===============================================================================
IP Address prefix_len ifindex
20000000:0:21122ff:fe334455 64 1001
20000001:20000:0:9 64 1001
fe800000:0:21122ff:fe334455 64 1001
30000001:20003:0:4 64 1002
fe800000:0:21122ff:fe334455 64 1002
Console#
debug route
This command shows detailed information for all entries in the routing table, routing entries in the
Linux kernel, and entries in the ZebOS routing table.
Syntax
debug route {all | ipal | routecfg}
all – Shows all routing tables.
ipal – Shows routing entries in the Linux kernel.
routecfg – Shows entries in the ZebOS routing table.
Command Mode
Privileged Exec
Example
Console#debug route all
Dump IP Routing Table from Kernel
Destination Nexthop Interface table id
----------- ------- --------- --------
192.168.1.0 0.0.0.0 5097 254
192.168.2.0 0.0.0.0 1001 254
192.168.3.0 0.0.0.0 1002 254
10.0.0.0 192.168.2.99 1001 254
0.0.0.0 192.168.2.99 1001 254
Destination Nexthop Interface table id
----------- ------- --------- --------
2000:: :: 1001 254
2000:1:2:: :: 1001 254
3000:1:2:3:: :: 1002 254
3000:1:2:3:: :: 1002 254
FE80:: :: 5097 254
FE80:: :: 1002 254
FE80:: :: 1001 254
FF00:: :: 5097 254
FF00:: :: 1002 254
FF00:: :: 1001 254
:: FE80::2E0:98FF:FE7A:CE7A 1001 254
:: 2000::64 1001 254