Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 536)

480 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
23
MVR for IPv4
show mvr associated-profile
This command shows the profiles bound the specified domain.
Syntax
show mvr [domain domain-id] associated-profile
domain-id - An independent multicast domain. (Range: 1-5)
Default Setting
Displays profiles bound to all MVR domains.
Command Mode
Privileged Exec
Example
The following displays the profiles bound to domain 1:
Console#show mvr domain 1 associated-profile
Domain ID : 1
MVR Profile Name Start IP Addr. End IP Addr.
-------------------- --------------- ---------------
rd 228.1.23.1 228.1.23.10
testing 228.2.23.1 228.2.23.10
Console#
show mvr interface
This command shows MVR configuration settings for interfaces attached to the MVR VLAN.
Syntax
show mvr [domain domain-id] interface
domain-id - An independent multicast domain. (Range: 1-5)
Default Setting
Displays configuration settings for all attached interfaces.
Command Mode
Privileged Exec
MVR Multicast VLAN Shows the VLAN used to transport all MVR multicast traffic.
MVR Current Learned
Groups The current number of MVR group addresses
MVR Upstream Source IP The source IP address assigned to all upstream control packets.
TABLE 111 show mvr - display description (Continued)
Field Description