Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 1174)

1118 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
47
Multicast VLAN Registration for IPv4
Parameters
These parameters are displayed:
Configure Profile
• Profile Name – The name of a profile containing one or more MVR group addresses.
(Range: 1-21 characters)
• Start IP Address – Starting IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
• End IP Address – Ending IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
Associate Profile
• Domain ID – An independent multicast domain. (Range: 1-5)
• Profile Name – The name of a profile containing one or more MVR group addresses.
(Range: 1-21 characters)
Interface
To configure an MVR group address profile:
1. Click Multicast, MVR.
2. Select Configure Profile from the Step list.
3. Select Add from the Action list.
4. Enter the name of a group profile to be assigned to one or more domains, and specify a
multicast group that will stream traffic to participating hosts.
5. Click Apply.
FIGURE 392 Configuring an MVR Group Address Profile
To show the configured MVR group address profiles:
1. Click Multicast, MVR.
2. Select Configure Profile from the Step list.
3. Select Show from the Action list.