beautypg.com

Configuring transceiver thresholds, Figure 49, Configuring transceiver – Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual

Page 775: Thresholds

background image

Brocade 6910 Ethernet Access Switch Configuration Guide

719

53-1002651-02

34

Port Configuration

Interface
To display identifying information and functional parameters for optical transceivers:

1. Click Interface, Port, Transceiver.

2. Select Show Information from the Action list.

3. Select a port from the scroll-down list.

FIGURE 49

Displaying Transceiver Data

Configuring Transceiver Thresholds

Use the Interface > Port > Transceiver (Configure DDM Thresholds) page to configure thresholds for
alarm and warning messages for optical transceivers which support Digital Diagnostic Monitoring
(DDM).

CLI References

“transceiver-threshold current”

on page 264

“transceiver-threshold rx-power”

on page 265

“transceiver-threshold temperature”

on page 266

“transceiver-threshold tx-power”

on page 267

“transceiver-threshold voltage”

on page 268