beautypg.com

Show management – Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual

Page 244

background image

188

Brocade 6910 Ethernet Access Switch Configuration Guide

53-1002651-02

9

Management IP Filter

show management

This command displays the client IP addresses that are allowed management access to the switch
through various protocols.

Syntax

show management {all-client | http-client | snmp-client | telnet-client}

all-client - Displays IP addresses for all groups.

http-client - Displays IP addresses for the web group.

snmp-client - Displays IP addresses for the SNMP group.

telnet-client - Displays IP addresses for the Telnet group.

Command Mode
Privileged Exec

Example

Console#show management all-client

Management Ip Filter

HTTP-Client:

Start IP address End IP address

-----------------------------------------------

1. 192.168.1.19 192.168.1.19

2. 192.168.1.25 192.168.1.30

SNMP-Client:

Start IP address End IP address

-----------------------------------------------

1. 192.168.1.19 192.168.1.19

2. 192.168.1.25 192.168.1.30

TELNET-Client:

Start IP address End IP address

-----------------------------------------------

1. 192.168.1.19 192.168.1.19

2. 192.168.1.25 192.168.1.30

Console#