beautypg.com

Displaying vlan information, Show vlan, Table 86 – Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual

Page 440

background image

384

Brocade 6910 Ethernet Access Switch Configuration Guide

53-1002651-02

20

Displaying VLAN Information

Displaying VLAN Information

This section describes commands used to display VLAN information.

show vlan

This command shows VLAN information.

Syntax

show vlan [id vlan-id | name vlan-name]

id - Keyword to be followed by the VLAN ID.

vlan-id - ID of the configured VLAN. (Range: 1-4093)

name - Keyword to be followed by the VLAN name.

vlan-name - ASCII string from 1 to 32 characters.

Default Setting
Shows all VLANs.

Command Mode
Normal Exec, Privileged Exec

Example
The following example shows how to display information for VLAN 1:

Console#show vlan id 1

VLAN ID: 1

Type: Static

Name: DefaultVlan

Status: Active

Ports/Port Channels : Eth1/ 1(S) Eth1/ 2(S) Eth1/ 3(S) Eth1/ 4(S) Eth1/ 5(S)

Eth1/ 6(S) Eth1/ 7(S) Eth1/ 8(S) Eth1/ 9(S) Eth1/10(S)

Eth1/11(S) Eth1/12(S)

Console#

TABLE 86

Commands for Displaying VLAN Information

Command

Function

Mode

show interfaces status

vlan

Displays status for the specified VLAN interface

NE, PE

show interfaces switchport

Displays the administrative and operational status of an interface

NE, PE

show vlan

Shows VLAN information

NE, PE