beautypg.com

Calendar set, Show calendar, Calendar set show calendar – Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual

Page 156

background image

100

Brocade 6910 Ethernet Access Switch Configuration Guide

53-1002651-02

5

Time

Related Commands

“show sntp”

on page 95

calendar set

This command sets the system clock. It may be used if there is no time server on your network, or if
you have not configured the switch to receive signals from a time server.

Syntax

calendar set hour min sec {day month year | month day year}

hour - Hour in 24-hour format. (Range: 0 - 23)

min - Minute. (Range: 0 - 59)

sec - Second. (Range: 0 - 59)

day - Day of month. (Range: 1 - 31)

month - january | february | march | april | may | june | july | august | september |
october | november | december

year - Year (4-digit). (Range: 1970 - 2037)

Default Setting
None

Command Mode
Privileged Exec

Command Usage
Note that when SNTP is enabled, the system clock cannot be manually configured.

Example
This example shows how to set the system clock to 15:12:34, February 1st, 2011.

Console#calendar set 15:12:34 1 February 2011

Console#

show calendar

This command displays the system clock.

Default Setting
None

Command Mode
Normal Exec, Privileged Exec

Example

Console#show calendar

15:12:34 February 1 2011

Console#