beautypg.com

Gvrp timer leave – Allied Telesis AT-8100 Series User Manual

Page 971

background image

AT-8100 Switch Command Line User’s Guide

971

GVRP TIMER LEAVE

Syntax

gvrp timer leave

value

Parameters

value

Specifies the Leave Timer in centiseconds, which are one
hundredths of a second. The range is 30 to 180 centiseconds. The
default is 60 centiseconds.

Mode

Global Configuration mode

Description

Use this command to set the GARP Leave Timer.

Note

The setting for this timer must be the same on all GVRP-active
network devices.

Example

This command sets the Leave Timer to 0.8 seconds:

awplus> enable
awplus# configure terminal
awplus(config)# gvrp timer leave 80