Allied Telesis AT-8100 Series - Manual (Page 1921)

1921
Appendix B
Management Software Default Settings
This appendix lists the factory default settings of the switch. The features
are listed in alphabetical order:
 “Boot Configuration File” on page 1923
 “Class of Service” on page 1924
 “Console Port” on page 1925
 “DHCP Relay” on page 1926
 “802.1x Port-Based Network Access Control” on page 1927
 “Enhanced Stacking” on page 1929
 “GVRP” on page 1930
 “Hardware Stacking” on page 1931
 “IGMP Snooping” on page 1932
 “IGMP Snooping Querier” on page 1933
 “Link Layer Discovery Protocol (LLDP and LLDP-MED)” on page 1934
 “MAC Address-based Port Security” on page 1935
 “MAC Address Table” on page 1936
 “Management IP Address” on page 1937
 “Manager Account” on page 1938
 “Port Settings” on page 1939
 “RADIUS Client” on page 1940
 “Remote Manager Account Authentication” on page 1941
 “RMON” on page 1942
 “Secure Shell Server” on page 1943
 “sFlow Agent” on page 1944
 “Simple Network Management Protocol (SNMPv1, SNMPv2c and
SNMPv3)” on page 1945
 “Simple Network Time Protocol” on page 1946
 “Spanning Tree Protocols (STP, RSTP and MSTP)” on page 1947
 “System Name” on page 1949
 “TACACS+ Client” on page 1950
 “Telnet Server” on page 1951