Allied Telesis AT-8100 Series - Manual (Page 1471)

AT-8100 Switch Command Line User’s Guide
1471
CRYPTO CERTIFICATE REQUEST
Syntax
crypto certificate id_number request common_name
organizational_unit organization location state country
Parameters
id_number
Specifies a certificate ID number. The range is 0 to 10. A certificate
must be assigned an ID number that is unique from the ID numbers
of any certificates already on the switch.
common_name
Specifies a common name for the certificate. This should be the IP
address or fully qualified URL designation of the switch. This
parameter can have up to 64 characters. Spaces and special
characters are not allowed.
organizational_unit
Specifies the name of a department, such as Network Support or
IT. This parameter can have up to 64 characters. Spaces and
special characters are not allowed.
organization
Specifies the name of a company. This parameter can have up to
64 characters. Spaces and special characters are not allowed.
location
Specifies the location of the switch. This parameter can have up to
64 characters. Spaces and special characters are not allowed.
state
Specifies the state, such as California or Nevada. This parameter
can have up to 64 characters. Spaces and special characters are
not allowed.
country
Specifies the ISO 3166-1 initials of the country. This parameter
must be two uppercase characters.
Mode
Global Configuration mode