Allied Telesis AT-8100 Series - Manual (Page 270)

Chapter 12: Power Over Ethernet Commands
270
“POWER-INLINE PRIORITY” on
page 284 Port Interface Assigns a PoE priority level to a port.
“POWER-INLINE USAGE-
THRESHOLD” on page 286 Global
Configuration Sets the power threshold for the
SNMP power-inline trap.
“SERVICE POWER-INLINE” on
page 287 Global
Configuration Activates PoE on all of the ports on
the switch.
“SHOW POWER-INLINE” on
page 288 Privileged Exec Displays switch and port PoE
information.
“SHOW POWER-INLINE COUNTERS
INTERFACE” on page 291 Privileged Exec Displays the port PoE event counters.
“SHOW POWER-INLINE
INTERFACE” on page 293 Privileged Exec Displays port PoE information.
“SHOW POWER-INLINE INTERFACE
DETAIL” on page 294 Privileged Exec Displays additional port PoE
information.
“SNMP-SERVER ENABLE TRAP
POWER-INLINE” on page 297 Global
Configuration Activates the SNMP power-inline trap
for PoE.
Table 23. Power over Ethernet Commands (Continued)
Command Mode Description