Allied Telesis AT-8100 Series - Manual (Page 437)

437
Chapter 24
Enhanced Stacking Commands
The enhanced stacking commands are summarized in Table 41.
Table 41. Enhanced Stacking Commands
Command Mode Description
“ESTACK COMMAND-SWITCH” on
page 439 Global
Configuration Designates the switch as the
command switch.
“ESTACK RUN” on page 440 Global
Configuration Activates enhanced stacking on the
switch.
“NO ESTACK COMMAND-SWITCH”
on page 441 Global
Configuration Returns the switch to the state of
being a member switch.
“NO ESTACK RUN” on page 442 Global
Configuration Disables enhanced stacking on the
switch.
“RCOMMAND” on page 443 Global
Configuration Redirects the management session to
a different switch in the enhanced
stack.
“REBOOT ESTACK MEMBER” on
page 444 Global
Configuration Reboots member switches of an
enhanced stack from the command
switch.
“SHOW ESTACK” on page 446 Privileged Exec Displays whether the switch is a
command or member switch and
whether enhanced stacking is enabled
or disabled.
“SHOW ESTACK COMMAND-
SWITCH” on page 448 Privileged Exec Displays enhanced stacking
information about the command
switch from a member switch.
“SHOW ESTACK REMOTELIST” on
page 449 Privileged Exec Displays the switches of an enhanced
stack.
“UPLOAD CONFIG REMOTELIST” on
page 451 Global
Configuration Uploads boot configuration files from
the file system in the command switch
of an enhanced stack to the member
switches.