Allied Telesis AT-8100 Series - Manual (Page 831)

831
Chapter 57
RSTP Commands
The RSTP commands are summarized in Table 93 and described in detail
within the chapter.
Table 93. Rapid Spanning Tree Protocol Commands
Command Mode Description
“NO SPANNING-TREE PORTFAST”
on page 833 Port Interface Removes ports as edge ports on the
switch.
“NO SPANNING-TREE
ERRDISABLE-TIMEOUT ENABLE”
on page 834 Global
Configuration Deactivates the RSTP BPDU guard
timer.
“NO SPANNING-TREE LOOP-
GUARD” on page 835 Port Interface Disables the BPDU loop-guard feature
on the ports.
“NO SPANNING-TREE PORTFAST
BPDU-GUARD” on page 836 Port Interface Disables the BPDU guard feature on a
port.
“NO SPANNING-TREE RSTP
ENABLE” on page 837 Global
Configuration Disables RSTP on the switch.
“SHOW SPANNING-TREE” on
page 838 User Exec and
Privileged Exec Displays the RSTP settings on the
switch.
“SPANNING-TREE ERRDISABLE-
TIMEOUT ENABLE” on page 840 Global
Configuration Activates the RSTP BPDU guard
timer.
“SPANNING-TREE ERRDISABLE-
TIMEOUT INTERVAL” on page 841 Global
Configuration Specifies the duration the RSTP
BPDU guard timer.
“SPANNING-TREE FORWARD-TIME”
on page 842 Global
Configuration Sets the forward time, which specifies
how long ports remain in the listening
and learning states before they
transition to the forwarding state.
“SPANNING-TREE GUARD ROOT”
on page 843 Port Interface Enables the Root Guard feature on a
port.
“SPANNING-TREE HELLO-TIME” on
page 844 Global
Configuration Sets the hello time, which defines how
frequently the switch sends spanning
tree configuration information when it
is the root bridge or is trying to
become the root bridge.