Allied Telesis AT-8100 Series - Manual (Page 885)

AT-8100 Switch Command Line User’s Guide
885
SHOW SPANNING-TREE MST
Syntax
show spanning-tree mst
Parameters
None
Mode
Privileged Executive Mode
Description
Use this command to display the MST to VLAN port mapping.
Example
This example displays the MST to VLAN port mappings:
awplus> enable
awplus# show spanning-tree mst
An example of the display is shown in Figure 171.
Figure 171. SHOW SPANNING-TREE MST Command
% Default: Bridge up - Spanning Tree Enabled
% Default: CIST Root Path Cost 200000 - CIST Root Port 33033 - CIST
Bridge Priority 327 68
%
Default: Forward Delay 15 - Hello Time 2 - Max Age 20 - Max-hops 0
% Default: CIST Root Id 00:30:84:fd:7a:55
% Default: CIST Reg Root ID 02:10:18:47:04:10
% Default: CIST Bridge ID 02:10:18:47:04:10
% Default: CIST 4 topology change(s) - last topology change Sat Jan 1
00:01:35:2000
% Instance VLAN
% 0: 1,4095