Allied Telesis AT-8100 Series - Manual (Page 1768)

Chapter 101: QoS Commands
1768
Example
This example displays the settings of a policy map called “pmap4:'
awplus# show policy-map pmap4
Description This is an optional field that is used to describe the policy map.
Set the description with the DESCRIPTION command. See
“DESCRIPTION (Policy Map)” on page 1710.
State Indicates if the policy map is assigned to a port (attached) or
not (detached). Use the SERVICE-POLICY INPUT command
to attach or detach a policy to a port. See “SERVICE-POLICY
INPUT” on page 1765.
Default class-map
action Indicates the action for traffic not matched by any of the class
maps associated with a given policy map. Set this value with
the DEFAULT-ACTION command. There are three options:
permit, deny, and copy-to-mirror. See “DEFAULT-ACTION” on
page 1708.
CLASS-MAP-NAME Indicates the class maps that are associated with the policy
map. To associate a class map with a policy map, use the
CLASS command. See “CLASS” on page 1705.
Table 238. SHOW POLICY-MAP Command Description (Continued)
Field Description