Allied Telesis AT-8100 Series - Manual (Page 711)

AT-8100 Switch Command Line User’s Guide
711
SHOW LOG REVERSE
Syntax
show log reverse
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the event messages in the buffered log from
newest to oldest. This command and the SHOW LOG command display
the same messages, but in different order. The SHOW LOG command
displays the messages from oldest to newest. To cancel the display, type
‘q’ for quit. You cannot filter the log for specific types of messages. For an
example and description of the log, refer to Figure 134 on page 704 and
Table 80 on page 704.
Example
This command displays the event messages in the buffered log from
newest to oldest messages:
awplus# show log reverse