Snmp-server enable trap, Snmp-server enable trap 2 – Allied Telesis AT-8100 Series User Manual

Page 1172

Text mode
Original mode

Chapter 74: SNMPv1 and SNMPv2c Commands

1172

SNMP-SERVER ENABLE TRAP

Syntax

snmp-server enable trap

Parameters

None

Mode

Global Configuration mode

Description

Use this command to activate the transmission of all SNMP traps, except
for power-inline, link status, and authentication traps, which are activated
separately.

Confirmation Command

“SHOW RUNNING-CONFIG SNMP” on page 1165

Example

This example activates the transmission of all SNMP traps, except for
power-inline, link status, and authentication traps:

awplus> enable
awplus# configure terminal
awplus(config)# snmp-server enable trap