Allied Telesis AT-8100 Series - Manual (Page 557)

AT-8100 Switch Command Line User’s Guide
557
SHOW FILE SYSTEMS
Syntax
show file systems
Parameter
None
Mode
Privileged Exec mode
Description
Use this command to display the specifications of the file system in the
switch. An example is shown in Figure 116.
Figure 116. SHOW FILE SYSTEMS Command
The fields are described in Table 57.
Size (b) Free (b) Type Flags Prefixes S/D/V Lcl/Ntwk Avail
-------------------------------------------------------------------------
2.0M
1.4M flash rw /cfg/ static local Y
Table 57. SHOW FILE SYSTEMS Command
Parameter Description
Size (B) The total amount of flash memory in the
switch. The amount is given in megabytes
(M) or kilobytes (k).
Free (B) The amount of unused flash memory in
the switch. The amount is given in
megabytes (M) or kilobytes (k).
Type The type of memory.
Flags The file setting options.
Prefixes The directory in which files are stored.
This is always “cfg” for configuration file.
S/D/V The memory type: static, dynamic, or
virtual.