Allied Telesis AT-8100 Series - Manual (Page 1125)

AT-8100 Switch Command Line User’s Guide
1125
NO AUTH DYNAMIC-VLAN-CREATION
Syntax
no auth dynamic-vlan-creation
Parameters
None
Mode
Port Interface mode
Description
Use this command to disable dynamic VLAN assignments of
authentication ports. For background information, refer to “Supplicant and
VLAN Associations” on page 1072.
Confirmation Command
“SHOW AUTH-MAC INTERFACE” on page 1131
“SHOW DOT1X INTERFACE” on page 1136
Example
This example disables dynamic VLAN assignment of authenticator port
1.0.15:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.15
awplus(config-if)# no auth dynamic-vlan-creation