Allied Telesis AT-8100 Series - Manual (Page 1179)

1179
Chapter 75
SNMPv3 Commands
The SNMPv3 commands are summarized in Table 119 and described in
detail within the chapter.
Table 119. SNMPv3 Commands
Command Mode Description
“NO SNMP-SERVER” on page 1181 Global
Configuration Disables SNMPv1, v2c and v3 on the
switch.
“NO SNMP-SERVER ENGINEID
LOCAL” on page 1182 Global
Configuration Returns the SNMP engine ID value to
the default value:
“NO SNMP-SERVER GROUP” on
page 1183 Global
Configuration Deletes SNMPv3 groups from the
switch.
“NO SNMP-SERVER HOST” on
page 1184 Global
Configuration Deletes SNMPv3 host entries.
“NO SNMP-SERVER USER” on
page 1186 Global
Configuration Deletes SNMPv3 users from the
switch.
“NO SNMP-SERVER VIEW” on
page 1187 Global
Configuration Deletes SNMPv3 views from the
switch.
“SHOW SNMP-SERVER” on
page 1188 Privileged Exec Displays the current status of SNMP
on the switch.
“SHOW SNMP-SERVER GROUP” on
page 1189 Privileged Exec Displays the SNMPv3 groups.
“SHOW SNMP-SERVER HOST” on
page 1190 Privileged Exec Displays SNMPv3 host entries.
“SHOW SNMP-SERVER USER” on
page 1191 Privileged Exec Displays SNMPv3 users.
“SHOW SNMP-SERVER VIEW” on
page 1192 Privileged Exec Displays SNMPv3 views.
“SNMP-SERVER” on page 1193 Global
Configuration Activates SNMPv1, v2c and v3 on the
switch.
“SNMP-SERVER ENGINEID LOCAL”
on page 1194 Global
Configuration Configures the SNMPv3 engine ID.