Allied Telesis AT-8100 Series - Manual (Page 708)

Chapter 46: Event Log Commands
708
This command is also used to view the configuration of the syslog client.
For information, refer to “SHOW LOG CONFIG” on page 725 in Chapter
48, “Syslog Client Commands” on page 721.
Example
The following command displays the configuration of the event log:
awplus# show log config
Program The software module messages to be
stored in the log. The modules are listed
in Table 81 on page 705. The default is all
modules.
Message Text Text that identifies the messages to be
stored in the log.
Table 82. SHOW LOG CONFIG Command
Field Description